Program the devices using the following symbols, descriptions, and addresses: /O Symbol L S Descript

Program the devices using the following symbols, descriptions, and addresses: /O Symbol L S Description Address Input Input Input Input Input Output Output Output Output NO LS I:0/0 S 1 S 2 S 3 S 4 NO MC PB I:0/1 NO MC PB I:0/2 NO SS I:0/3 NO SS I:0/4 Motor Relay MR O:0/0 L_1 L_2 L_3 Red PL O:0/1 Green PL O:0/2 Blue PL O:0/3 In this lab you will be automating the operation of the conveyor system. The program is required to operate as follows: The motor M_R is to be latched if pushbutton S 1 is activated and both switches S_3 and S_4 are ON The motor M_R is to be unlatched if pushbutton S 2 is activated If either switch S_3 or S_4 is turned OFF and ON while the motor M R is activated, the motor must automatically stop and start without the need for button S_1 to be activated. When the limit switch L_S is activated the motor M_R must automatically stop and automatically start when L_S is deactivated The red pilot light L_1 is to be energized when the conveyor motor is not running. The green pilot light L_2 is to be energized when the conveyor motor is running The blue pilot light L_3 is to be energized when S_3 and S_4 are ON

 

Looking for a Similar Assignment? Let us take care of your classwork while you enjoy your free time! All papers are written from scratch and are 100% Original. Try us today! Use Code FREE15