# For the system attached, we want to increase the power transfer from Bus 1 to Bus 2 by adding a SVC

For the system attached, we want to increase the power transfer from Bus 1 to Bus 2 by adding a SVC at the midpoint. (a) Calculate the power transformer from Bus 1 to Bus 2 if the SVC is disconnected. (B) suppose the SVC is connected through a 18:1 transformer with a leakage reactance of 0.005ohm on low voltage side, determine the MVAR requirements for the SVC to do the following: (i)Increase P12= 650MW with the TCR is not gated. (ii) How much capacitance and inductance is needed to increase P12 to 633MW with the TCR operating with ? = 75 deg. Assume Delta connection of the TCR and Capacitors (iii) Modify your solution for a 12 pulse SVC (one TCR in Delta and the other in delta)

B. Suppose the SVC is connected through a the MVAR requirements for the SVC to do the following: () Increase P12=650MW with the TCR is not gated. (2) How much capacitance and inductance is needed to increase Pl12 to 633MW with the TCR o Assume delta connection of the TCR and capacitors (3) Modify your solution for a 12 pulse SVC (one TCR in A and the other in A). BUS 1 BUS M BUS 2 j30 ohm j30 ohm /V11=345KVLL /Vml ?? V21= 345KVLL at oo at (01-02)/2 ww at -17.605° SVC

### Save your time - order a paper!

Get your paper written from scratch within the tight deadline. Our service is a reliable solution to all your troubles. Place an order on any task and we will take care of it. You won’t have to worry about the quality and deadlines

Order Paper Now